Sturdy rolling cart for bedside use, plus bed hooks, handle, and shoulder strap intra- hospital transfers.
Tactile, straightforward interface with programmable ventilation profiles for specific disease states.
Integrated compressor and gas mixer, plus hoses and adapters for most oxygen and air sources.
External oxygen reservoir that allows for use with an oxygen concentrator or flowmeter, if high-pressure oxygen sources are not available.
Internal battery that enables 7 hours of operation without mains power, plus optional additional 14-hour external batter
The CCV fulfills or exceeds most of the essential specifications recommended by the WHO for ICU, transport, and sub-acute ventilators for COVID-19 care.
Infant/Pediatric ( 5 kg) – Adult
Ventilation modes: V-AC, V-SIMV, P-AC, P- SIMV, CPAP/BiPAP
Quick Start Modes: Adult and Child
Custom modes: 3 programmable profiles available for quick recall
Tidal volume:40 – 2000 mL
Respiratory rate: 0 or 5 – 60 bpm
Insp. time: 0.5 – 2.0 sec
PEEP/CPAP: 0 – 25 cmH2O
Pressure support: 0 – 25 cmH2O*
Flow: 5–60L/min( 80 L/min in some modes)
Target pressure: 15 – 55 cmH2O
Trigger: Pressure, -5 – -1 cmH2O
Pressure relief: 85 cmH2O
Set %O2: 21% – 100%
Settings lock: On/Off
Measured: Airway Pressure, Delivered Tidal Volume, Spontaneous Breath Rate
Calculated: I:E Ratio, Flow, %O2
Breathing circuits: Single limb, reusable (adult and pediatric)
Humidification: Active humidifier with reusable accessories, HMEF-compatible
Portability: Rolling stand, handle, bed hooks, shoulder strap
Additional: Pulse oximeter, gas source adapters, HMEF starter kit
Oxygen input: High pressure port (0 – 80 psi) Low pressure barb (< 10 psi) Reservoir for low-flow sources
Air input: Room air (internal compressor)
Battery:
Internal, 7 hr backup
External, 14 hr backup (optional
Input voltage: 110 – 240 VAC, 50/60 Hz, <1A
Dimensions: 340 × 130 × 350 mm
Weight: 8.5 kg (18.8 lb)
Shock: 100 G-Force
Vibration: IEC 60068-2-6
Operating: -18°C – 50°C, 5 – 95% RH
Storage: -40°C – 60°C
Ingress: IP22